QNAP has recently added the TS-233 to their portfolio of small NAS devices. Built with an ARM Cortex-A55 quad-core 2.0 GHz processor and configured with 2 GB RAM, the TS-233 is designed for those looking to increase collaboration between multiple users. The QNAP TS-233 was reported to run data at 114MB/s download and 103MB/s upload on Windows over the gigabit RJ45 Port. The TS-233 is accompanied by QTS 5, QNAP’s OS.
QNAP TS-233
NAS systems have become an everyday norm for many people since working from home has taken such an exponential rise, and with it, the need to properly store data and protect it has become essential for many. The QNAP TS-233 is a compact and minimal NAS that can fit right into any environment. Since third-party cloud storage can become quite costly, small NAS devices such as the TS-233 are a solid option for some as it also gives users a better sense of security of their data.
The QNAP TS-233 is a low-cost option for users looking to establish their own cloud storage. With only 2 drive bays, the TS-233 isn’t designed for high capacity storage but instead focuses on the user experience of data backups and a minimalist design. With the TS-233, QNAP users can expect their data to be completely secure with comprehensive security management from QNAP along with Snapshot protection in case of accidental data deletion or malware attacks.
As with other consumer-focused QNAP NAS systems, QNAP’s proprietary software, QTS 5 is the operating system for the TS-233. QTS 5 comes with new features to provide a better user experience. QTS 5 gives admins and users a brighter display, a quick start guide for those that have just booted the system, and even a smoother reactive interface. QTS 5 allows for data and photo management, supports VPN connections for more secure internet use, and even remote management through TeamViewer.
The TS-233 is designed for personal use and the configuration reflects that with an ARM Cortex-A55 quad-core processor along with 2GB of DDR4 RAM. Although not the fastest components in the world; it should perform well enough for its intended use.
The QNAP TS-233 is currently available on Amazon for $199.
QNAP TS-233 Specifications
| CPU | ARM 4-core Cortex-A55 2.0GHz processor |
| CPU Architecture | 64-bit ARM |
| Floating Point Unit | Yes |
| Encryption Engine | Yes |
| System Memory | 2 GB, not expandable
Note: Reserves some RAM for use as shared graphics memory. |
| Maximum Memory | 2 GB, not expandable |
| Flash Memory | 4 GB (Dual boot OS protection) |
| Drive Bay | 2 x 3.5-inch SATA 6Gb/s, 3Gb/s |
| Drive Compatibility | 3.5-inch SATA hard disk drives 2.5-inch SATA hard disk drives 2.5-inch SATA solid state drives |
| Hot-swappable | Yes |
| Gigabit Ethernet Port (RJ45) | 1 |
| 5 Gigabit Ethernet Port (5G/2.5G/1G/100M) | Optional via the QNA-UC5G1T USB to 5GbE network adapter |
| Wake on LAN (WOL) | Yes |
| Jumbo Frame | Yes |
| USB 2.0 port | 2 |
| USB 3.2 Gen 1 port | 1 |
| Form Factor | Tower |
| LED Indicators | System Status, LAN, USB, HDD1~2 |
| Buttons | Power, Reset, USB Copy |
| Dimensions (HxWxD) | 7.43 × 3.55 × 6.15 inch |
| Weight (Net) | 2.45 lbs |
| Weight (Gross) | 4.3 lbs |
| Operating temperature | 0 – 40 °C (32°F – 104°F) |
| Storage Temperature | -20 – 70°C (-4°F – 158°F) |
| Relative Humidity | 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
| Power Supply Unit | 65W Adapter, AC 100-240V |
| Power Consumption: HDD Sleep Mode | 3.43 W |
| Power Consumption: Operating Mode, Typical | 10.81 W
Tested with drives fully populated. |
| Fan | 1 x 80mm, 12VDC |
| System Warning | Buzzer |
| Max. Number of Concurrent Connections (CIFS) – with Max. Memory | 200 |